GB
|
Operating Instructions
1
Translation of the original Operating Instructions
Introduction to the Operating Instructions
These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in
accordance with the regulations. The Operating Instructions contain important information on how to use the machine
safely, correctly and economically. Observing this information will help increase the reliability and working life of the
machine. The Operating Instructions must always be at hand when the machine is being used.
They must be read and observed by every person dealing with the machine, whether operating, servicing or trans-
porting it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country
of use and on site, the generally recognised rules on working safely and correctly must be observed as well as the
accident prevention rules of the relevant professional associations.
CONTENT Page
Introduction to the Operating Instructions
1
Technical Data
2
Illustration and explanation of pictograms
2
Intended use
3
General safety instructions
3
General safety information for power tools
3
Starting up
7
Safety devices on your chain brake
8
Instructions on working properly with the chain saw
8
Maintenance and Servicing
9
In the case of technical problems
10
Repair Service
10
Information for environmental protection/ disposal
10
Spare parts
10
Warranty
10
EC Declaration of Conformity
Summary of Contents for AKS 4030
