18
Using
Adjusting the Working Length
1. For adjusting the working length of the
device loosen the sleeve nut (1) by turning
clockwise (right hand threads).
2. Press the unlock button (8) und pull resp.
push the tube forth and back.
3. Release the unlock button in order to adjust
the length according to you needs. Let the
shaft snap into the closest step.
4. Secure the shaft by tightening the sleeve nut (1) before resuming
work.
Changing the Brush Roller
1. Press the lock/unlock button (10) and
remove the housing cheek (11).
2. Remove the brush roller (12) from the unit.
3. Insert a new roller intended for the device.
4. Re-attach the cheek to the housing and
press the lock/unlock button (10), so the
housing cheek can snap in place. Make
sure the cheek is securely locked in place
before resuming work.
Usage Hints
If necessary moisten the surface lightly and use the device like a
broom.
Draw it over the ground in straight lines and loosen the dirt from the
ground.
Do not keep the rotating brushes in one place for extended times, the
surface may be marked.
