25
Risk of injury with hard objects ejected from the cutting tool as a
result of contact with the rotating string or blade.
When working, use sturdy shoes and protective gloves.
Maximum engine rpm. Do not use the product at engine
revolutions above the allowed maximum.
DO NOT
operate without the attached guard. Avoid contact with the rotating string spool.
WARNING!
A sharp blade!
To avoid injury do not touch the string length limiting blade.
WARNING!
To avoid burns, do not lean against the muffler, engine and gearbox during
operation. These parts remain hot for a while after work. Use the type of fuel
recommended by the manual.
2 SPECIFICATION
2.1 Function of the product
2.1.1 The gasoline brush cutter
BCG-2917
is used, in accordance with the specifications and
requirements with a view to ensuring the safety instructions given in the instruction manual, in gardens
and parks, for trimming lawn edges and grass mowing in hard-to-reach places (under shrubs, etc.) for
mowing weeds and small shrubs of 1.0-1.3 cm thick. Use of the product for any other purpose is a
violation of the manual.
2.1.2 The manufacturer (seller) is not responsible for any damages resulting from improper use, or
defects caused by making any unauthorized changes in the product design. In this case, the
responsibility rests with the user.
2
.1.3 The product shall be operated in the range of working temperatures from +5°C to +35°C, relative
air humidity less than 80%.
2.1.3 In connection with the ongoing activity to improve the product, the manufacturer reserves the
right to make minor design changes that are not reflected in the instruction manual (technical data
sheet) and does not affect the efficient and safe operation of the product.
2.2 Technical features (Table 1):
Table 1
Feature name
Description
Engine
2-cycle, with air cooling
Ignition type
Electronic
Engine volume, cm³
52
Idle revolutions, rpm
3000±300
Maximum engine revolutions, rpm
80
00±300
Engine capacity, W/h.p.
2900/3,9
Fuel
Fuel mixture in the ratio gasoline АI-92/oil for 2-
cycle engines: 30/1
Ignition switch
Slide switch, 1-contact, 2 positions
Starter
manual, system «Easy start»
Fuel tank capacity, l
1.2
Shaft Pipe Length, mm
1500
Shaft Pipe Diameter, mm
28
Driven Shaft, mm × teeth
1530 × 9
Summary of Contents for BCG-2917
