UAV Hardware Tracker | User’s Manual
Operating the Tracker
Charging the Tracker
1
Turn off your tracker.
Your tracker will not charge its battery while it is
turned on.
2
Connect a USB cable to the tracker and a USB power
source (5V).
Battery charging will begin, and the charging
indicator will light up solid red.
The integrated charger uses an intelligent two-stage
charging process, with a fast initial charge followed
by a trickle charge to top off the battery.
3
When the battery is fully charged, the charging
indicator will light up solid blue. The charging circuit
will stop charging the battery.
A full charge of an empty tracker battery should take
around 60 minutes.
GARUDA ROBOTICS PAGE 21 / 36