ANITA ©
MP00100EN_170907
7
When you work with the machine be careful near the needle, shearing blades, thread lever
and the pressure elements.
Be more careful when the head on the base is tipped not to tilt the machine with the base.
When you put the head of the machine into working position hold the head with your both
hands. Then there can´t be engagement between the machine and the plate of the base.
4. PRECAUTION BEFORE USING
A. Do not turn on the power as stepping the pedal
B. Turn off the power when leasing the work place
C. Be sure to turn the power off ehen rapeiring the sewing machine or changing the needle
D. Make sure to connect the earthing
E. Do not use multiple number of motors in one outlet
F. Keep optional distance from the noise centre such as high-frequency weber operation
G. Be careful of high tension power when disassembling the controller box. (Wait about ten
Minutes after turning off the power before disassembling.)
H. When an error comes along, verify the error code first and turn the power on again to use
it.
I. Make sure to hold the connector edge, facing the arrow mark when inserting or
disassembling the frontal connector of the controller box. (Do not hold or pull the cable.)
J. Check the belt tension.
K. In case of a new machine which was delivered a long time ago or of a machine that has
not been operated for an extend period, lubricate two or three times using the filling
tube,
first mening up the face plate on such a places as the friction pat of the thread take-up
unit, needle bar or presser bar.
5. INSTRUCTION FOR THE DISPOSAL
When the machine isn´t possible to run because its technical life give it to the company
ANITA B,s.r.o. for its disposal or you can give the machine to another company which is
specialised for disposal of product.
www.garudan.cz
Summary of Contents for anita GC-3317 Series
