ANITA ©
Serie GF-105
18
19. Adjustment of the Wiper
1. Positioning the wiper
Adjust the position of the wiper according to the thickness of the material sewn. The adjustment
procedure is as follows:
a) Turn the handwheel in the normal direction of rotation to align white marker dot (1) on the
handwheel with red marker dot (2) on the machine arm.
Fig. 34
b) Adjust the distance between the flat part of the wiper and the center of the needle to 1 mm. Tighten
wiper adjust screw (5) so that the wiper is pressed and fixed by wiper collar (6).
Fig. 35
c) When the wiper is unnecessary, turn wiper switch (7) OFF.
Fig. 36
www.garudan.cz
Summary of Contents for GF-105 Series
