© ANITA
MP05300EN,MP05400EN_200120
GF-1130-448,GF-2230-448 MH/L34
25
G
DRIVE UNIT MANUAL
G1.
SAFETY INSTRUCTIONS
1)
Read the manual carefully before installation and use.
2)
Installation of the drive unit may only be carried out by a qualified person.
3)
Follow all instructions indicated by symbols to avoid injury.
4)
Do not use a multiple socket extension cord.
5)
Make sure that the power supply and voltage match the requirements on the label of the
machine.
6)
Do not use in direct sunlight, outdoors and in the temperature over
45 °C
or below
0 °C.
7)
Do not use close to the heater. Humidity level must be between 30-95 %.
8)
Do not use in dusty, corrosive or explosive environment.
9)
Do not put heavy objects on the power cord, do not pull it or bend it.
10)
Proper permanent grounding is necessary.
11)
Use safety covers for all moving parts.
12)
Do a test run at the slow speed and check the direction of the rotation.
13)
Switch off the machine and unplug it in these situations:
•
threading the needle (needles), hooks, etc.
•
changing the needle, presser foot, needle plate, hooks, hook bobbins,
feeders, needle guards, finger guards, work guides, etc.
•
the machine is not in use and left unattended
•
opening or removing the protective covers
•
any maintenance, repair, inspection and adjustment of the machine
•
cleaning the machine
14)
Maintenance, repair, inspection and adjustment of the machine may only be carried
out by a qualified person.
15)
Use only original or approved spare parts from manufacturer.
16)
Do not use heavy objects.
G2.
DESCRIPTION AND INTENDED USE OF A DRIVE UNIT
The ASD58 series are power units that are designated to drive sewing machines and to be
built into a sewing machine. They consist of the engine itself, the control box and the control
panel (keypad). Other use is not permitted.
G3.
DRIVE UNIT TECHNICAL PARAMETERS
Product type
ASD58-5 ASU58-55 ASD58-75 ASU58-75
AHE58-55
Voltage
AC 23
0 ±20 % V
Frequency
50/60 Hz
Max. power
850 W
www.garudan.cz
Summary of Contents for GF-1130-448 MH/L34
