© ANITA
MP05300EN,MP05400EN_200120
GF-1130-448,GF-2230-448 MH/L34
30
G5.2.
Operation panel keys description
Button
Name
Description
1
Function
(Parameters)
Use the button to select and confirm parameter
settings and return to the sewing mode.
2
Start back tacking Selects and turns on the initial back tacking.
3
End back tacking
Selects and turns on the end back tacking.
4
Free sewing mode
Selects free sewing mode. The icon lights up on the
display. Press the foot control to start sewing.
5
W sewing mode
key
Press this key to enter the W sewing mode.
LCD
icon is on. In W sewing interface
use the
corresponding key „+“ or „
-
„ to set number of stitches
of each segment (A, B, D) default range 1~F
corresponds to the value 1~15.
6
Multi-segment
sewing
Press this key to enter the multi-segment sewing
mode.
LCD icon is on. In multi-segment sewing
interface
use „+“ or „
-
„ key to set
max. 24 segments. P01 is number of segments, -01 is
current segment setting, -16 is number of stitches in
the segment.
7
Four-segment
sewing
Press this key to enter the four-segment sewing
mode.
LCD icon is on. In four-segment sewing
interface
use the „+“ or
„
-
„ key to set
number of stitches of each segment (E, F, G, H)
default range 1~F corresponds to the value 1~15.
8
Slow start
When the icon
is lit, the slow start mode is on.
Press the key again for turning the slow start mode
off.
9
Thread clamp
When the icon
is lit, the thread clamp mode is
on. Press the key again for turning the thread clamp
mode off.
10
Needle up/down
stop position
Set the stop position of the needle. When the icon
is lit, the needle stops up. When the icon
, is
lit, the needle stops down in the fabric. Note: you
can select needle stop position directly as parameter
www.garudan.cz
Summary of Contents for GF-1130-448 MH/L34
