© ANITA
MP03100EN_180912
12
13. WINDING THE BOBBIN THREAD
Turn on the power. Insert the bobbin
core into the bottom of bobbin winder.
See Fig. (10).
According to the arrow direction. Please
winder the thread on the bobbin core
for several circles.
Turn the winder spanner (3). Lift the
presser foot.
Push the pedal down, and it will winder
the thread automatically.
The winder spanner (3) will recover
automatically when the bobbin thread is
full.
* If the bobbin thread in misalignments. You can loosen the screw (4) and move the winder
spanner (3) please to adjust.
* The winder thread amount can be adjusted by the screw (6).
Remarks: The suitable winder thread amount is 80 % around the bobbin core horizontally.
14. THREADING BOTTOM THREAD
Turn the hand wheel till the needle up to the highest
position. See Fig. (11).
The bobbin thread should be right twisting. Then put
the bobbin into the bobbin case.
Holding thread end embed the bobbin in the set of
open slots (1), after the top of the spindle skin (2)
spring fork intermediate outlet head (3).
The bobbin should be clockwise when the bobbin
thread is draw up.
To pry the bobbin covered (4) put the bobbin sets
into the hook (add note when the bobbin case the
positioning plate is on the positioning groove on the
shaft and bobbin core is consistent).
Figure 10
Figure 11
www.garudan.cz
Summary of Contents for GF-3131-447 MH
