© ANITA
MP03100EN_180912
15
20. ADJUST THE LENGTH OF THE THREAD AFTER TRIMMING
By turning a small thread clamp nut (1). To adjust. See
Fig. (17).
•
When the shear line, the line is loose, line only
small thread clamp device provided by the tension.
• The length of the standard surface lines head for 40-
70 mm.
• If small clip line nut (1) and tighten the thread of the
line length is short.
• If the thread clamp nut (1) to relax, the thread or the
line length is long.
21. ADJUST THREAD TAKE-UP SPRING
Pick wire spring standard mainly as follows: When
the presser foot (2) down, big hook line (3) to pick
line on the upper surface of the spring (1) 5- 8 mm.
See Fig. (18).
Put down the presser foot (2). Loosen the set
screw (4).
Tum the clip line components (5) to adjust the
position of the wire spring.
Tighten the set screw (4).
Pull line thread clamp device (5), a little finger to
hold.
Face line down, make pick wire spring (1) and
big line hook (3) on the surface, is determined
to pick the strength of wire spring.
Open to insert thread clamp screw grow (6), by
taking turns to adjust the strength of the wire
spring (1).
Notice:
When using a force-measuring device aim (7)
please read the number on the red line.
Figure 17
Figure 18
www.garudan.cz
Summary of Contents for GF-3131-447 MH
