© ANITA
MP03100EN_180912
23
Parameter
Parameter Function
Range
Default
Key
Description
P22
Setting Stitches C of End
Back-Tacking
+/-
[End Back-Tacking] C, D segment pin
count set Quick Setup from the front,
where the setting is invalid
P23
Setting Stitches D of End
Back-Tacking
+/-
P24
Anti-pedaling pedals points;
voltage
0-1000
110
+/-
P25
Stitch Balance for End Back-
Tacking 3
0-200
0-200
131
+/-
0
200 Action gradually lag
P26
Stitch Balance for End Back-
Tacking 4
158
+/-
P27
Adding 1 Stitch to C Segment
of End Back-Tacking
0-1
0
+/-
1: Thin materials
0: Thick materials
P28
Mode Selection for Bar-
Tacking
A/M
A
+/-
Bar-Tacking, reverse solenoid action:
A: One shot to pedal, it will automatic
execute Bar-Tacking
M: Pedal-controlled and motor can
stop arbitrarily
P32
Stitch Balance for Bar-Tacking
5
0-200
131
+/-
0
200 Action gradually lag
P33
Stitch Balance for Bar-Tacking
6
158
+/-
P34
Mode Selection for Constant-
Stitch Sewing
A/M
A
+/-
A: One shot to pedal, it will automatic
execute Constant-Stitch
M: Pedal-controlled and motor can
stop arbitrarily)
P37
Wiper Function Selection P1
of Constant-Stitch Sewing
0-11
8
+/-
0: NO Action 1: Wiper Action
2-11:Thread Clamp action and the
pressure gradually increased
P38
Trimmer Function Selection
ON/OFF
ON
+/-
ON: Trimmer Valid
OFF: Trimmer Invalid
P39
Presser Foot UP/Down a
intermediate stop
UP/DN
DN
+/-
UP: Presser foot goes up
automatically
DN: Presser foot keeps down
(Controlled by heeling pedal)
P40
Presser Foot UP/Down after
Trimming
UP/DN
DN
+/-
UP: Presser foot goes up
automatically
DN: Presser foot keeps down
(Controlled by heeling pedal)
P41
Display the sewing finished
quantity
0
+/-
Counting the finished-sewing quantity
P42
Information Display
N-01
+/-
NO1 Electrically controlled version
serial number
NO2 Selected needle cassette version
NO3 Speed
NO4 Pedals AD
NO5 Positioning angle (0—359)
NO6 Under the positioning angle
NO7 Bus voltage AD
P43
Setting Direction of Motor
Rotation
CCW/WC
CCW
+/-
CW: Clockwise
CCW: Counter Clockwise
www.garudan.cz
Summary of Contents for GF-3131-447 MH
