© ANITA
MP03100EN_180912
26
33. ERROR CODE TABLE:
Error Code
Problem
Strategies
E1
Power Module is faulty
Abnormal over current or voltage
Resistor is damage or F1 fuse is blown
System will be shut down until the power
E2
1) When power on, detected main voltage too low
2) Connect the wrong voltage, too low
Moto and machine will be shutting down
Please check the AC power. (Too low) Please check
the main pc board
E3
Operation Box linked to CPU interface had
communication error
Motor and machine will be shutting down
Please check the operation box
E5
The connection of the Foot Pedal error
Motor and machine will be shutting down
Please check the connection of the Foot Pedal or
the problem of it
E7
a) Bad connection at the motor connector
b) Machine locked or object stuck in the motor
pulley
Motor and machine will be shutting down
Please check the motor connectors, synchronizer
situation and machine situation
E8
Manual Back-Tacking lasts for 15 sec
Motor and machine will be shutting down until the
power resets on
E9
Synchronizer signal error
Check the upper and lower positioning signal is
normal; no locator mode automatically and the
tangent; thread wiper; the positioning and all fixed
stitch sewing style features also invalid
Motor cannot operate normally. (Please check the
positioning signal abnormalities)
E12
Power is turned on without the synchronizer
signal
Motor still can run, but it automatically starts the
clutch mode. All constant-stitch sewing pattern and
trimmer/wiper function is invalid
Please check the synchronizer
E13
Overheat Protection f or Power Module
Please check the connection between power
module and heat sink
E14
Encoder signal error
Please check the encoder signal or change the
encoder
E15
Abnormal over current protection for Power
Module
System will be shut down until the power resets on
Please check the power board in detail
E17
Trimmer switch error
Please check the trimmer switch whether turn in
the correct position
www.garudan.cz
Summary of Contents for GF-3131-447 MH
