Adjustment
——————————
●
Adjust support
1
(screw
2
) according to
Requirement 1
.
●
Adjust the spring tension of thread check spring
3
by turning screw
4
(screw
5
).
●
Adjust the spring tension of thread by checking spring
6
and
7
(screw
8
).
●
Adjust support
9
( screw
10
) according to
Requirement 1
. (If the adjustment range is
too low, support
9
can be screwed into another hole).
●
Adjust the thread regulator
11
(screw
12
) according to
Requirement 2
.
For technical reasons it may be necessary to deviate from the specified
spring stroke or spring tension.
Move the thread regulator
11
(screw
12
) towards “+”
(=more thread ) or “-”(= less thread).
www.garudan.cz
