Care and Maintenance
——————————
8.03 Cleaning
Clean the hook, hook compartment and toothed wheel
3
every day, several times if in continuous
use
Switch the machine off!
Danger of injury if the machine is started
accidentally!
●
Bring the needle bar to its highest position.
●
Open the post cap and remove the bobbin case cap and the bobbin.
●
Unscrew hook gib
1
.
●
Turn the hand wheel until the point of bobbin case
2
penetrates into the groove of the
hook race approx.
5mm
.
●
Remove bobbin case
2
.
●
Clean th hook race with paraffin.
●
When inserting the bobbin case
2
, ensure that the horn of the bobbin case
2
engages
in the groove of the needle plate.
●
Screw hook gib
1
back on the close the post cap.
www.garudan.cz
