Input of Pattern
31
①
Display of Interface for Setting Point Sewing
User can select the Point Sewing (code 021)
in the interface of code list or press
Point Sewing Key in standard interface to have
access to the interface for setting point sewing.
②
Setting of Point Sewing
In the interface for setting the point sewing, the
set value of existing sewing speed is shown on B
Press the button of the sewing speed so as to
activate the interface for inputting the value. The
setting method on the sewing speed of point
sewing is same to that of the linear normal
sewing.
After the setting (or without need to change), the
coordinate input interface will be displayed as
long as ENTER (C) is pressed.
③
Move Needle Position
In the coordinate input interface, user can press
the Direction Key
(D) to move the
needle in the pointed direction.
④
Input Position
Move to the pointed position and press Passing
Point Key (E) to have that position inputted as a
needle entry point.
User can also input such position by repeating the
operation in step 3 and step 4.
⑤
End the Setting of Point Sewing
Press the ENTER (F) to input the set value. And
the system will return to the standard interface.
(7) Normal Sewing (022)
The linear normal sewing and the curve normal sewing can be inputted.
www.garudan.cz
Summary of Contents for GPS/F-1006 Series
Page 2: ...w w w g a r u d a n c z...
Page 4: ...w w w g a r u d a n c z...
