ANITA ©
MP00006EN_181206
11
4.1
Pattern chaining:
Function of pattern chaining automatically changes sewing patterns in accordance with previously
set sequence. It is mostly used when customer requires performing more sewing operations with one
sewn material but, at the same time, these operations cannot be performed within one sewing
pattern. Following example is typical for use of this function: sewing of first part of material,
temporary gluing of second part of material which overlaps the firstly sewn part and subsequent
stitching of the two parts together. It is possible switch between two window styles by parameter 58
Style of pattern open.
4.2
Pattern chaining in style characters:
Machine can store 8 lists of chains with patterns. You can change list by selection in box D on picture
5. There are patterns from current list in table A on picture 5. You can add pattern to list by button B
on picture 5. If you press button B on picture 5, window from picture 6 will be showed. You can
delete selected pattern from list by button C on picture 5. Pattern can select pressing patterns name
in table A on picture 5. You can add pattern by barcode pressing button G on picture 5 (only on
machines with barcode reader). Button Apply (E on picture 5) is for activation sewing by current
chain list. Button Cancel close window without sewing.
Picture 5: Pattern chaining window
A – List of patterns in current chain
B – Add pattern to current chain
C – Delete selected pattern from current chain
D – List of chains with patterns
E – Save and start current chain
F – Close window without chaining
www.garudan.cz
Summary of Contents for GPS/G-10060
Page 69: ......
