ANITA ©
MP00006EN_181206
47
09 Signal of pedal 2 (middle)
0 Disable
No function for middle pedal (default setting for models GPS/G-3020, GPS/G-
3525, GPS/G-4032, GPS/G-6032 and GPS/G-6040)
1 Start sewing
By pressing the pedal machine is sewing
2 Left feed plate
By pressing the pedal you can take control of left or upper feed plate (default
setting for models GPS/G-1507, GPS/G-2010, GPS/H-1510 and GPS/H-2010).
3 Right feed plate
By pressing the pedal you can take control of right or bottom feed plate.
4 Both feed plates
By pressing the pedal you can take control of both feed plates.
5 Label device
Label device is commanded by pedal (it is necessary to set parameter
06 Feed
plate type
to value
3 Label holder
).
10 Signal of pedal 3 (right)
0 Disable
No function for right pedal.
1 Start sewing
By pressing the pedal machine is sewing.
2 Left feed plate
By pressing the pedal you can take control of left or upper feed plate.
3 Right feed plate
By pressing the pedal you can take control of right or bottom feed plate
(default setting for models GPS/G-1507, GPS/G-2010, GPS/H-1510 and
GPS/H-2010).
4 Both feed plates
By pressing the pedal you can take control of both feed plates. (default
setting for models GPS/G-3020, GPS/G-4032, GPS/G-6032 and GPS/G-6040)
5 Label device
Label device is commanded by pedal (it is necessary to set parameter
06 Feed
plate type
to value
3 Label holder
).
11 Operation of presser foot
0 Always down
The presser foot is always in lower position.
1 Sew down
The presser foot is down only in sewing (default)
2 Trial down
The presser foot is down in sewing and also in jumping (section without
sewing) and in PAUSE code function.
12 Down timing of presser foot
0 With start
The presser foot is going down at the start of sewing (default)
1 With feed
The presser foot is going down together with the frame
13 Thread broken detector
0 Disable
OFF (default)
1 Enable
ON
www.garudan.cz
Summary of Contents for GPS/G-10060
Page 69: ......
