ANITA ©
MP00006EN_181206
35
9.4
Saving pattern:
Modified pattern can be saved by pressing icon D2 (pattern will be overwritten by new data). If you
want to change the name press icon D3 and enter new number (3 characters).
9.5
Deleting pattern:
Any pattern can be deleted by following sequence of operations. Firstly, open the pattern you want
to delete. Push the button
Clear stitches
D5 and then push the button
Save
D2. By saving the empty
pattern, this pattern will be deleted.
9.6
Copying pattern from and to SUB pen drive:
Před kopírováním je nutné připojit USB flash disk do USB zásuvky v přední části šicího stroje.
Klikneme na tlačítko
Copy pattern/USB kopírování
A9 tím se zobrazí obrazovka pro kopírování vzorů
(obr. 17). V případě, že se zobrazí chybové hlášení o tom, že USB disk nebyl detekován, je třeba
vyčkat několik sekund a znovu kliknout na tlačítko
Copy pattern/USB kopírování
A9.
Before you start to copy any pattern it is necessary to connect USB pen drive to USB port in front part
of the sewing machine. Push the button
Copy pattern
A9. Screen for copying patterns will be
displayed (pic. 17). If there appears error message about failure in detection of USB pen drive, it is
necessary to wait a few seconds and then press again the button
Copy pattern
A9.
Copying from sewing machine to USB pen drive:
Existing patterns saved in the machine are
displayed in window C (see pic. 17). Choose the file you want to copy in window C (it must be in blue
frame just like the file 002.gps on pic. 17), then choose folder on USB pen drive to which you want to
copy the file in window E and press button
From machine to pen drive
A (pic. 17). Selected file will be
copied to USB pen drive. In window D you can see the new file was added to USB pen drive.
Copying from USB pen drive to sewing machine:
Window E (pic. 17) displays directory structure of
USB flash disc. Listing of the items can be done by double click on the requested directory. Files
included in the folder are displayed in window D. Choose folder with file you want to copy in window
E, click on this file in window D (it must be in blue frame) and push the button
From pen drive to
machine
B (pic. 17). Selected file will be copied to machine. In window C you can see the new file was
added to the machine.
www.garudan.cz
Summary of Contents for GPS/G-1507
Page 69: ......
