ANITA ©
MP00006EN_181206
45
12.2
Parameter list:
02 Trim after emergency stop
After pressing button 'STOP' machine makes trimming
automatically.
0 Auto trim
Machine makes trimming before stopping machine after pressing button 'STOP'
1 Manual trim
After pressing button 'STOP' machine stops. After pressing button 'STOP' again
or pressing key Trim machine performs trimming (default setting)
03 Sewing speed acceleration
Sewing speed acceleration
0 Slow start 0
200, 400, 600, 800, 1000, max. speed
1 Slow start 1
300, 500, 700, 900, 1200, max. speed
2 Slow start 2
400, 500, 800, 1000, 1200, max. speed
3 Slow start 3
500, 600, 900, 1100, 1300, max. speed (default)
4 Slow start 4
500, 500, 500, 800, 1000, max. speed
5 Slow start 5
500, 1000, 1400, 1700, 2000, 2500, max. speed
6 User def. 1
User adjustable line 1
7 User def. 2
User adjustable line 2
01 Machine move to origin
after finish
Machine moves to origin point after pressing button 'STOP' and
key Cancel
0 Disable
Machine moves to the start point after pressing key Cancel. (this setting of
parameter is default for models GPS/G-1507, GPS/G-2010, GPS/G-3020,
GPS/G-3525, GPS/H-1510 and GPS/H-2010)
1 Enable
After pressing key Cancel machine moves to the centre of the frame (point
0,0) and then to the start point. (this setting of parameter is default for
models GPS/G-4032, GPS/G-6032, GPS/G-6040 and GPS/G-10060)
2 Disable PP down
Machine moves to the start point after pressing key Cancel and feed plate
stays in bottom position.
3 Enable PP down
After pressing key Cancel machine moves to the centre of the frame (point
0,0) and then to the start point and feed plate stays in bottom position.
4 Return
Machine moves to the start point after pressing key Cancel in same way as
sewing.
5 Return PP down
Machine moves to the start point after pressing key Cancel in same way as
sewing and feed plate stays in bottom position.
04 Transfer starting angle (°)
-200 to 200
Position of needle in which the movement of feed plate is started. (default is 0)
www.garudan.cz
Summary of Contents for GPS/G-1507
Page 69: ......
