-24-
- Remove the retaining screws of the right side number-posting cover .
(C)
(B)
(A)
WARNING
Riding with a damaged throttle cable could be dangerous.
CLUTCH
The clutch lever should have a maximum play of 3 mm. This margin
increases with the wear on the clutch plate.
To adjust, proceed as follows:
- Use bolt
A
to adjust the lever’s range of movement to the rider’s
convenience.
- Adjust the play of the lever using bolt
B
.
WARNING
- Maintain the clutch lever with the play shown, otherwise the
performance and useful life of the clutch may be adversely affected.
- This model uses mineral oil GRO ULTRA 5 for the clutch hydraulic
circuit.
- Tank
C
must not be filled with brake liquid.
EXHAUST SYSTEM
The exhaust and the muffler reduce the noise and send gases away
from the rider.
If the exhaust is badly damaged, dented, cracked or rusted, replace
it with a new one. Replace the muffler fibre if the exhaust noise
becomes too loud or if the engine performance drops.
Muffler replacement
- Remove the retaining screws
(A)
of the muffler
(B)
and
remove the muffler towards
the rear.
- Separate the silencer from
the joint -arrow-.
- Replace the muffler and reinstall the assembly.
(A)
(B)
