-
41
-
Recommended oil:
SAE 80API"GL-4" Hypoid gear oil
Oil quality
Periodic oil change:
0.25L(0.21lmpqt,)
Total amount:
0.27(0.23lmp qt.)
1.Drain plug
g. Install the filler bolt and tighten to the specified torque
:2.3Nm(2.3m.kg)
h. Check for oil leakage.lf oil leakage is found, check
for the cause
i. Reinstall the final gear case cover.
Spark plug inspection
You should periodically remove and check the spark
plug because heat and deposits will cause slow damage
and erosion of the spark plug if electrode erosion is
excessive, you should replace the spark plug with one
of the propet type D7RTC
Before installing the new spark pulg measure the
electrode gap with a feeler gauge and adjust to
spectifcation.
1.Spark plug gap
Spark plug gap:
0.6-0.7mm
When installing the spark pulg, generally clean the
gasket surface and use a new gasket. Clean off any
grime from the threads and tighten to specification.
Spark plug torque: 17.5Nm (1.75m.kg)
Summary of Contents for K2 QUAD 250 - SERVICE
