11 SERVICE WORK ON THE CHASSIS
48
S04327-12
–
Tighten screws
6
.
Guideline
Screw, bottom triple
clamp
M8
15 Nm (11.1 lbf ft)
S03419-10
–
Tighten nut
4
.
Guideline
Nut, steering stem
M20x1.5
10 Nm (7.4 lbf ft)
S03416-11
–
Position the fuel tank breather in the steering stem.
–
Tighten screw
7
.
Guideline
Steering stem clamp
screw
M8
20 Nm (14.8 lbf ft)
S04327-13
–
Using a plastic hammer, tap lightly on the upper triple clamp to
avoid stresses.
–
Tighten screws
8
.
Guideline
Screw, top triple clamp M8
17 Nm (12.5 lbf ft)
S03455-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings
9
and contact surfaces
B
of the
spacers.
Long-life grease (
–
Insert the spacers.