SERVICE WORK ON THE CHASSIS 11
53
11.19
Installing the shock absorber
S04337-11
Main work
–
Push splash protector
1
to the side and position the shock
absorber. Mount and tighten screw
2
.
Guideline
Screw, top shock
absorber
M12
60 Nm (44.3 lbf ft)
Loctite
®
2701™
–
Mount and tighten screw
3
.
Guideline
Screw, bottom
shock absorber
M12
60 Nm (44.3 lbf ft)
Loctite
®
2701™
–
Attach brake line.
Finishing work
–
Remove the motorcycle from the lift stand. (
11.20
Removing the seat
S04338-10
–
Remove screw
1
.
–
Raise the rear of the seat, pull the seat back, and lift it off.
11.21
Mounting the seat
S04339-10
–
Mount the front of the seat on the collar bushing of the fuel tank,
lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
S04338-10
–
Mount and tighten screw
1
of the seat fixing.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)