Oil the sides of the rollers to enable oil to better penetrate inside.
Wipe off any excess oil.
(A). Oil.
HANDLEBARS
To suit various riding positions, the handlebar position can be
adjusted front to rear.
Handlebar position adjustment
Loosen the bolts
(B)
on the handlebar clamps
(A)
and position the
handlebar as desired.
Tighten the bolts, first the front bolts and then the rear bolts to a
torque of 25 Nm. If the handlebar is correctly installed, there will be
a minimal gap at the front and rear of the clamp after tightening
(A)
.
BRAKES
Disc and disc pad wear is automatically compensated for and has
no effect on the brake lever or pedal action. So there are no parts
that require adjustment on the brakes except brake lever play and
the brake pedal position and play.
-
29
-
(A) (A)
(A)
(B)
(A)
