Chronometer
To use the chronometer, press
Reset
to put it to zero. Counting
begins immediately.
The
partial distance in Km or Miles
can be reset by pressing the
Reset
button.
Trip distance in Km
To program the trip distance in Km or Miles. Once the battery is
connected the display indicates that the program is active (metric or
imperial). To make the change connect the battery while holding in
one of the buttons, the change will appear on the screen.
This function remains completely in memory even though the battery
may not be connected.
Clock precision:
The clock precision can be adjusted if it is fast or
slow.
Wheel design
The design of the wheel may change (10"). This affects the precision
of the speed and distance measurements.
Backlight
The internal display back light has an independent circuit that can
accept 8 to 18 volts AC (Two stroke engines) or DC (4 stroke engines).
The circuit is protected.
00:00
Reset
Mode
(The Mode button is used to change screens.)
0
Speed
00:00
Clock/timer
0.0
Total distance
0000
Partial distance
-
57
-
THE MULTIFUNCTION INSTRUMENT PANEL
The multi-function display has two buttons, a mode button to change
display and a reset button for certain functions.
The initial display is the clock (time) screen; if you press mode the
display changes in the following order:
1. Clock/timer.
2. Speed (Km/h or Miles/hour according to the program).
3. Total distance in km or miles. This has a memory even if battery
disconnected.
4. Trip distance (can be reset).
Setting the time
To set the time go to the clock screen and hold in the Mode button
until the time set screen appears,
Reset
can be used to change the
hours, pressing
Mode
once more will allow the minutes to be set also
using the
Reset
button. Once the time is set then the button
Mode
will begin the clock at zero seconds of the minute chosen, this can
be useful to coordinate times (ex: in competition).
Summary of Contents for QUAD WILD HP 300 RV - 2005
