GC-IMS
– User Manual
35/214
Ethernet Socket
Socket for connecting the device to a
local area network (LAN) or directly to a
computer.
Sample Out Socket
3 mm Swagelok plug for connecting the
device to an adequate laboratory waste
gas ventilation system/fume hood.
Gas Out Socket
3 mm Swagelok plug for connecting the
device to an adequate laboratory waste
gas ventilation system/fume hood.
Carrier Gas In Socket
3 mm Swagelok inlet plug for connecting
the device to a drift gas source.
Drift Gas In Socket
3 mm Swagelok inlet plug for connecting
the device to a drift gas source.
Gas Out Socket
3 mm Swagelok plug for connecting the
device to
Drift Gas In Socket / Carrier
Gas In Socket
of GC-IMS
Gas In Socket
3 mm Swagelok plug for connecting the
device to
Gas In Socket
of GC-IMS
Vent Socket
Socket for the internal pressure
compensation.
Signal Converter
–I/O
Socket
Socket for connecting a PLC
(Programmable Logic Controller) or other
devices.
To IMS Socket
Sub D Socket to power supply and device
control via GC-IMS.
The “
To IMS
” socket
of the CGFU must be connected to the
connector “
Signal Converter I/O
Port”
of
the GC-IMS.
Summary of Contents for GC-IMS
