gascraft BG126N3B Toulon, Assembly & Operating Instructions

 20

CARE AND MAINTENANCE                                                                                                     

CAUTION: 

All cleaning and maintenance should be done when grill is cool and with the gas supply 
turned off at the LPG cylinder. 
DO NOT clean any grill part in a self-cleaning oven. The extreme heat will damage the 
finish. 
 

Cleaning 

Burning-off the grill after every use (approx.15 minutes) will keep excessive food residue 
from building up. To “Burn Off” or heat clean your grill, turn the 3 main burners to HIGH with 
hood opened and run for 15minutes. Then use a wire brush to clean the grids. 
 

Recommended cleaning materials - 

Mild dishwashing liquid detergent, hot water, nylon cleaning pad, wire brush. 
DO NOT use cleaners that contain acid, mineral spirits or xylene. 
 

Outside surfaces - 

Use a mild dishwashing detergent and hot water solution to clean, and then rinse with water. 
 
If the inside surface of the grill lid has the appearance of peeling paint, baked on grease 
buildup has turned to carbon and is flaking off. Clean thoroughly with strong solution of 
detergent and hot water. Rinse with water and allow to completely dry. 
 
Interior of grill bottom - Remove residue using brush, scraper and/or cleaning pad, and then 
wash with dishwashing detergent and hot water solution. Rinse with water and let thoroughly 
dry. 
 
Cooking Grill & Plate - When the barbecue has cooled, clean the cast iron cookware with hot 
soapy water.   To remove any food residue, use a mild cream cleaner on a non-abrasive 
pad.   Rinse well, dry thoroughly and apply a coat of cooking oil.   Due to the weight of the 
cooking surfaces, it is not recommended that they are cleaned in a dishwasher. 
 
It is quite normal for surface rust to be present on cast iron cooking surfaces if cleaning 
procedure has not been followed.   If rust appears between uses or in storage, clean with a 
soft brass wire brush, re-wash with hot soapy water, dry off, re-oil and cure. 
 
Heat Shield - Clean residue with brush and wash with soapy water. Then rinse with water. 
 
Grease Collector - Periodically empty the grease cup and clean with dishwashing detergent 
and hot water solution.