21
CARE AND MAINTANCE
Cleaning the burner assembly – Make sure the grill is cool
1. Turn gas off at the control knobs and LPG cylinder.
2. Remove cooking grill & plate and flame tamers.
3. Remove grease collector.
4. Remove burner by unscrewing nut from beneath burner “foot” using a screwdriver and
pliers.
5. Lift burner up and away from gas valve orifice.
6. Clean inlet (venturi) of burner with small bottle brush or compressed air.
7. Remove all food residue and dirt on outside of burner surface.
8. Clean any clogged ports with a stiff wire (such as an opened paper clip).
9. Inspect burner for any damage (cracks or holes), If damage is found, replace with new
burner. Reinstall burner, check to ensure that gas valve orifices are correctly positioned
inside burner inlet (venturi)
1. Overlap 20mm between venturi tube and nozzle when assembled.
2. Keep the center line of venturi tube and nozzle on one line.
WARNING: If the instructions above are not followed, an explosion may result, possibly
causing serious bodily injury or death
Summary of Contents for BG126N3B Toulon
Page 6: ...6 ILLUSTRATED PARTS LIST...
Page 7: ...7 ILLUSTRATED PARTS LIST Cooking Plate...
Page 22: ...22 TROUBLESHOOTING...