-18-
9. TROUBLESHOOTING
The table below lists the problems that might occur with the machine, their potential causes and how
to solve them.
Problem
Cause
Solution
The machine does not start
Machine unplugged
See manual “6.3. Start-up”, point 3
The batter tank is not correctly
positioned
Locate it using its own centring
pieces.
The belt makes a noise
Incorrect belt tension
See manual “6.4. Notes”, point 1
The mesh is twisted
Straighten, repair or replace
affected area. See manual “8.
Maintenance”, points 4 and 5
The tooth rollers are worn.
See manual “8. Maintenance”,
point 1
The pieces are deformed as they
pass through the breader
There is insufficient bread.
See manual “6.3. Start-up”, point 7
The batter is not correct.
The batter should be smoother or
colder.
The bread forms lumps
There is too much batter and it is
coming into contact with the
bread.
See manual “6.3. Start-up”, point 5
The blower does not work
Check the turbine and the state of
the connections
The blower is not pointing in the
right direction.
Adjust it correctly by hand.
Summary of Contents for PRACTIC 350
