15
Safety and Product Care
To ensure correct and safe device use, please read the User Manual before using the device. Please handle the device
lightly, do not subject the device to impact/shock.
1. Do not submerse the device in water or allow liquid to be sampled into the device.
This will cause electric shock, fire or malfunction which may result in damage.
2. Do not keep the device in a hot/humid environment. Keep the device away from heat source or water.
3. Please use a standard USB power supply (such as PC's USB port, universal AC adapter with USB port).
4. Improper power supply can cause serious damage to the device or result in injury or death to the user.
Product Maintenance
1.
The maximum capacity of the SD card is 16G.
(This is five years
’
worth of space)
2.
During battery charging, the temperature of the device rises. The temperature and humidity sensors are affected.
Currently, measurements are only for reference. After batteries are fully charged and the device cools down,
measurements are reliable.
3. Repair –
Do not attempt to repair the device or modify the circuitry by yourself. Please contact CO2Meter if the device
needs servicing.
4. Caution –
The CO sensor must be replaced every 3 years.
5. Cleaning –
Disconnect the power before cleaning. Use a damp cloth, do not use a liquid
cleaning agent, such as benzene, thinner or aerosols.
6. Maintenance
– Recommended that the user conducts a comprehensive test and calibration every year to ensure
normal operation of the device.
CONTACT US
We are here to help!
For information or technical support, please contact us.
(386) 256‐4910 (Technical Support)
(386) 872‐7665 (Sales)
See CO2Meter, Inc. Terms & Conditions at,
www.CO2Meter.com/pages/terms‐conditions
Address:
CO2Meter, Inc.
131 Business Center Drive
Ormond Beach, FL 32174
USA
