3
WELCOME
Thank you for selecting the
CM-1000 Gaslab
®
Pro, Multi-Gas Sampling Data Logger
. The CM‐1000 series is
designed to simultaneously measure multiple gas concentrations through a sampling method. This device
features Li‐ion rechargeable batteries which allows for 30+ hours of use.
The CM‐1000 series data can be recorded to a micro SD card for retrieval and analysis. The full color LCD
display details each sensor’s reading as well as graphing the data on the screen. The CM‐1000 was designed for
applications like fire suppression testing, fumigation, scientific research, laboratory analysis and incubation.
At CO2Meter, we approach each customer’s application as a unique opportunity to understand, educate, and
provide product solutions that meet the customers’ needs while exceeding their expectations for reliability and
service. Our continued product innovation in combination with our “customer first” focus allows CO2Meter, Inc.
to continue to provide solutions for the future.
Based in Ormond Beach, FL, CO2Meter, Inc. is committed to the success of our customers as well as; the health,
welfare, and prosperity of our talented employees; and the continued development of our local community.
CO2Meter, Inc. appreciates your business and looks forward to working with you and your team in the future.
Please take some time to read through this manual to become familiar with the Multi‐Gas Sampling Data Logger.
Also, please pay special attention to the important safeguards.
IMPORTANT SAFEGUARDS
To reduce the risk of fire, electrical shock and/or injury to persons, basic safety precautions should always be
followed when using electrical appliances, including the following:
•
READ ALL INSTRUCTIONS BEFORE USING THIS METER.
•
Use only the included power supply to operate this meter. Inappropriate voltage supply could cause
irreparable damage to this device.
•
Do NOT use batteries other than the Li‐ion 18650 3.7V rechargeable batteries
•
Additional Li‐ion 18650 3.7V rechargeable batteries (3) (can be purchased,
•
Do not operate with an obstructed sample path. – remove the luer caps prior to operation.
•
Make sure that the tubes are securely attached to the meter
before
sampling a closed environment.
•
Ensure the SD Card has the gold chips
facing up
and towards the user, for proper use.
•
This meter is
not
designed for prolonged outdoor use.
•
Do not expose this meter to water or any liquids – utilize the included filters and water traps.
•
Do not operate this meter if the enclosure is opened.
•
Do not operate the device if it is malfunctioning.
SAVE THESE INSTRUCTIONS!
