5
PRODUCT OVERVIEW
The
GasLab® Pro Multi‐Gas Sampling Data Logger
is designed to simultaneously measure multiple gas
concentrations through a sampling method. Utilizing a micro pump, the device draws samples into the sensing
chambers allowing each sensor to take a fast and accurate measurement of the sample.
Meters with logging capabilities are designed to record data over extended periods of time to a 16GB micro SD card.
The SD card stores an indefinite amount of collected data points that can be retrieved later for analysis.
Real time data and graphing is available on all CM‐1000’s by rotating the device to a horizontal position.
The meters are ideal for applications such as, but not limited to monitoring of products with modified atmosphere
packaging (MAP), bio incubation, industrial, and testing of fire suppression systems.
The devices built‐in micro‐pump ensures reliable operation and consistent readings based on user‐selected time
intervals.
PRINCIPAL OF OPERATION
The sensors inside this device use advanced sensing technologies to sense, as a function of transmitted light, or by
fluorescence quenching by oxygen to identify the precise gas concentrations in a sampled setting.
Samples are pulled in through the tube inlet port and draw into the detection chamber by a micro‐pump, then
expelled through the tube outlet port. Ensure that the luer caps are both removed prior to operating the device.
Failure to do so will provide incorrect readings and may result in damage to the device.
The measured gas concentration levels are shown on the full color LCD display section in real time and/or logged into
micro SD memory card for later retrieval.
The device is factory calibrated immediately prior to shipping and will operate within the specified range and
precision upon its arrival.
