Setting The Timer To Turn One Cooking Zone Off
1. Touching the heating zone selection control that you
want to set the timer for.
2. Touch timer control, the minder indicator will start flashing
and “30” will show in the timer display.
3. Set the time by touching the or control of the timer.
Hint: Touch the “-“ or “+” control of the timer once will
decrease or increase by 1 minute. Touch and hold
the ”-“ or “+” control of the timer will decrease or
increase by 10 minutes. If the setting time exceeds
99 minutes, the timer will automatically return to 0 minute.
4. To cancel the timer, touch the heating zone selection control, and then touch
the timer control. The minute display will show “--”.
5. When the time is set, it will begin to count down immediately.
The display will show the remaining time and the timer
indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
6. When cooking timer expires, the corresponding cooking
zone will be switch off automatically.
Other cooking zone will keep operating if they are turned on previously.
21
(844) 538-7890
support@gaslandchef.com
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
www.gaslandchef.com
Summary of Contents for IH12BF
Page 36: ......