Failure Display And Inspection
If an abnormality comes up, the induction cooktop will enter the protective state
automatically and display corresponding protective codes:
The induction cooktop cannot
detect the pan because it is not
suitable for induction cooking.
The induction cooktop cannot
detect the pan because it is too
small for the cooking zone or
not properly centred on it.
Use cookware suitable for induction
cooking. See section ‘Choosing the
right cookware’.
Centre the pan and make sure that
its base matches the size of the
cooking zone.
Pans do not become
hot and appears in
the display.
Technical fault.
Please note down the error
letters and numbers, switch
the power to the induction cooktop
off at the wall, and contact a
qualified technician
The induction
cooktop or a
cooking zone has
turned itself off
unexpectedly, a
tone sounds and an
error code is
displayed(typically
alternating with one
or two digits in the
cooking timer
display).
Problem
What to do
Possible causes
Temperature sensor of the induction
coil failure
Please contact the supplier.
F3/F4
Temperature sensor of the IGBT failure.
High temperature of the induction coil
temperature sensor
Please contact the supplier.
Please contact the supplier.
F9/FA
Abnormal supply voltage
Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
E1/E2
E3
High temperature of the IGBT
temperature sensor
Please restart after the cooktop
cools down.
E5
27
(844) 538-7890
support@gaslandchef.com
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
www.gaslandchef.com
Summary of Contents for IH12BF
Page 36: ......