www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
support@gaslandchef.com
1 (844) 538-7890
12
16
17
2
7
18
Hardware Used: 1x AA Battery
4x Screws
Hardware Used: 1x Rubber Ring
5. Unscrew the red igniter button on the
control box and insert the AA battery
(17) with the POSITIVE end facing
upward. Then attach the control box
(2) underneath the middle plate (3)
with screws (19).
6. Carefully put the glass tube (7) up
through the center of the hole in the
upper plate (4). Make sure the rubber
ring (18) is attached on the lower end
of the glass tube.
Now place the glass tube through the
hole on the middle plate (3). Check
to ensure the glass tube covers the
center hole of the middle plate.
