7
TROUBLE SHOOTING
1. When the refrigerator does not work:
Check if there is a power failure.
Check if the power plug is plugged into the power outlet.
Check if the power point being used is turned on.
Check that the R.C.D. has not been tripped.
If ambient temperature is above 40°C the Thermal
Safety Cut may have operated depending on the
installation. Check if unit has restarted once ambient
temperature is below 35°C.
2. When the refrigerator is cooling excessively:
The temperature control dial may be set too high.
If you place drinks containing a lot of water directly
under the cool air outlets they may freeze. This does
not indicate a malfunction.
3. When the refrigerator is not cooling sufficiently:
The drinks may be packed too tightly together which
will block the flow of cool air.
You may have put something hot or a lot of drinks into
the refrigerator at the same time give the refrigerator
4 - 6 hours to cool warm drinks down.
The door may not have closed properly.
There may be insufficient clearance between the
refrigerator and the other surfaces, both sides, back
and above.
The temperature control may not be set low enough.
Daily ambient temperature may be excessively high.
Check there is no direct sun on front of fridge.
4. When condensation forms on the outside of
the refrigerator:
Condensation may form on the outside when the
humidity is high. This is the same result as the
condensation formed when chilled water is poured
into a glass. It does not indicate a malfunction. Wipe
dry with a cloth.
5. When you hear a sound like water flowing:
A sound like water flowing is the refrigerant flowing.
It does not indicate a malfunction.
6. When the cabinets side panel heats up:
The side panel of the cabinet will heat up when the
door is opened and closed frequently, when starting
the unit and when the unit operates in summer with
high ambient outside temperature.
Do not touch the side panel, it is a result of heat from
inside the cabinet.
It does not indicate a malfunction.
STABILISING FEET
These are already fitted to your bar fridge. Before turning
your bar fridge on please ensure your bar fridge is level
front to back and side to side.
1. If your bar fridge is not level use the fitted stabilising
feet to level.
2. To level unscrew the low corner stabilising bolt out
until bar fridge is level.
WIRE SHELVES
Remove shelves from packaging and locate on the shelf
supports and ensure they are level before use.
Stabilising Foot
