background image

GENERAL WARNINGS

WARNING

•  This appliance shall only be connected to a  

cylinder certified to AS2469 standards.

•   This appliance shall only be used with the Hose  

& Regulator Assembly supplied, Regulator is set  

to 95kPa and is not adjustable – Do Not Modify.

•   This appliance is designed for outdoor use only  

and must be operated away from any flammable  

material or surfaces and materials.

•   This appliance is to be stored in a dry and well- 

ventilated location free from direct sunlight.

•   Do not store when appliance is still connected to  

the cylinder.

•   Make sure that the cylinder is disconnected and 

is stored in a well-ventilated area, free from  

direct sunlight, heat and ignition sources.

•   If being stored indoors, ensure that the location  

complies with the standard AS/NZS1596.

•   This appliance must only be serviced by an  

authorised service agent, contact Sitro Group  

for assistance with repairs and spare parts.

DANGER

•   During operation all surfaces will be extremely  

hot and should not be touched or handled.

•   Do not use the appliance if it is leaking,    

damaged or does not operate properly.

•   Handle with care even after brief use, always  

pick up using the legs not the cylinder.

•   It may be hazardous to attempt to fit other types  

of gas containers or cartridges.

•   Use only in well ventilated areas.
•   Always operate appliance a minimum of 900mm  

from flammable materials, walls and 1200mm  

from the ceiling.

•   Do not use adaptors. Do not modify appliance to  

fit other connectors or cylinders.

•   Do not use multiple appliances to heat a single  

utensil.

•   Children must be supervised by an adult at all 

times.

•   Never leave appliance unattended when 

operating.

•   Use as a cooking appliance only, not to be used  

as heater or modified for any other reason.

•   Avoid boil over and spills on to burners.

CARBON MONOXIDE HAZARD

Using this appliance in an enclosed space may 

cause DEATH.
Do not use in caravans, tents, marine craft, cars, 

mobile homes or similar locations.

IMPORTANT

•  Use outdoors only.
•  Keep children away at all times.
•  CAUTION: Accessible parts may be very hot. 

Please take care when handling or moving the 

appliance.

•   Read these instructions for use carefully.  

Familiarise yourself with the appliance before 

connection it to its gas cylinder.  Keep these 

instructions for future reference.

•  The supplied LCC27 regulator and hose will only  

suit the safe LCC27 gas cylinder connection.
–  Only use in well ventilated areas.
–  Carbon monoxide hazard – Using this appliance 

in an enclosed space may cause death. 

•  Do not use in caravans, tents, marine craft, cars, 

mobile homes or similar locations.

•   This appliance shall only be used in an above 

ground open-air situation with natural ventilation, 

without stagnant areas, where gas leakage and 

products of combustion are rapidly dispersed by 

wind and natural convection.

•  Ensure the appliance is set up on a level and 

stable surface.

•   Do not move the appliance while in use or when 

hot. 

•   Only cooking vessels with a minimum diameter  

of 200mm and a maximum of 300mm are to be  

used with this appliance.

•   Take care that the primary air intakes, located  

on the burner tube of this appliance are not 

obstructed, or that air flow is restricted by   

placing items or other appliances close to or 

adjacent to the inlets.

•   If you smell gas, immediately turn the gas off at 

the cylinder and move the appliance and    

cylinder to a well-ventilated area outside,    

keeping well away from sources of heat    

such as naked flames and pilot lights.

•   Do not attempt to move or relocate the    

appliance when it is operating, extinguish    

the burner and allow to cool, disengage the 

gas cylinder then move the appliance.

2

3

CHECKING FOR GAS LEAKS

•   Check that all connections are tight and that the  

gas cylinder connection has been tightened  

before you turn the cylinder gas valve on.

•   NEVER check for leaks with a flame or pilot light.
•   Using Companion Gas Leak Detection Spray or  

soapy water, coat all connections, if bubbles  

appear turn the cylinder gas control off and 

retighten the connection before re-testing.

•   Inspect the appliance regularly for signs of wear,  

leaks or incorrect operation.

If symptoms such as flaring of the burner, issues 

with lighting, damages to hoses or connections 

or leaks from seals or gas controls are identified 

do not attempt to repair, return to your authorised 

stockist for service and maintenance.

CHANGING GAS CYLINDER

•   To check if gas remains in the cylinder, 

disconnect from the appliance and hold the 

cylinder in a vertical position then shake from 

side to side, if there is a sound or feel of liquid 

movement inside, the cylinder contains gas.

•   When changing gas cylinders ensure this is  

conducted outside in a well- ventilated location  

free from people, animals and ignition sources  

such as naked flames, pilot lights and electrical  

equipment with heaters or elements.

Part No.

Description

Qty

1

Steamer Pot

1

2

Boiler Pot

1

3

Burner Frame

1

4

Carry Bag

1

5

Hose and Regulator  

(LCC27 SafeLok)

1

6

Thermometer

1

7

Heat Reflector

1

8

Burner

1

9

Wing Nuts

2

10

Gas Valve Assembly

1

1

2

5

3

4

6

7

8

10

9

PARTS LIST

Summary of Contents for CS2100SL






Reviews: