Gasmate CS2134, Product Manual

•  Do not smoke when attempting to ignite appliance.
•  Always use protective gloves when handling 
  hot components.
•  Do not smoke at any time when attempting to  
  ignite the appliance burners.  
Caution: Do not move the appliance while in operation.
•  Do not leave the appliance unattended when alight.

Before connecting and disconnecting appliance to 

gas source, make sure burner controls are in ‘OFF’ 

position.

IMPORTANT

PIC. 3

ASSEMBLY

Review the contents of the package. Make sure all 
listed components are included.
1. To attach centre trivet (PIC. 1) use supplied screw  
  and nut assembly. Attach legs and corner trivets to  
  frame using supplied screws, taking care to align the  
  internal thread in leg assembly (PIC. 2).
2. Align the gas control assembly at the end of the  
  burner tube and then secure with screws (PIC. 3).
3. Ensure that Primary Air Disc is located close to the  
  burner tube opening. Attach the LP Gas hose to the  
  Gas Valve Assembly using a spanner – Do Not Over  
 Tighten.

PIC. 2

PIC. 1

Corner Trivets

Centre Trivet (Twin Burner Only)

8