10
11
10
INSTALLING - LARGE WALL MOUNT RANGEhOOD
WALL BRACKET
Note: Bracket must be level, if not rangehood will not
operate correctly.
1. Using a tape measure mark the centre bottom hole
(A) on your wall. This mark should be in the centre
of your cooking surface and 1562mm above your
cooking surface.
2. Position the wall bracket with the centre bottom
hole (A) over the mark you have just made.
3. Ensure bracket is level using spirit level.
4. Once level mark the remaining holes on your wall.
5. Your rangehood is very heavy. Please use suitable
fixings and hole size for this weight.
Medium - 50Kg
Large - 80Kg
If unsure of which fixings please discuss with your
hardware stockist or rangehood installer.
6. Securely fix the rangehood bracket to a solid wall.
Ensure it is level before tightening the fixings.
Domestic BBQ Cooking Surface
Large
Wall
Bracket
C/L Cooking
Surface
C/L Bottom Hole
1562mm
A
280mm
280mm
280mm
60mm
BB
Q P
LAT
E
1562mm
275mm
20mm
FITTING
1. Lift and position the Rangehood so that the wall
bracket slides into all lifting holes on the top wall
side of the motor box.
2. Check to ensure that the Rangehood is level side to
side as well as front to back. It is imperative that the
Rangehood is level so that it operates correctly.
