3
Gas Cylinder Use & Safety
This is a low pressure spit roaster and must only
be used with the hose and regulator supplied.
Your spit roaster is designed for use with 9Kg
LPG cylinders.
The gas cylinder should be
filled
by a reputable
gas supplier and visually inspected and re-
qualified
at each
filling.
Always keep cylinder in an upright position.
Always close the cylinder valve when the spit
roaster is not in use.
Do not subject gas cylinder to excessive heat.
Never Store your Gas Cylinder Indoors.
If you store your spit roaster indoors, ALWAYS
disconnect the gas cylinder
first
and store the
cylinder safely outside.
Cylinders must be stored outdoors in a well
ventilated area out of reach of children, and must
not be stored in a building, garage or any other
enclosed area.
Location of your Spit roaster
DO NOT use your spit roaster in garages, porches,
sheds, breezeways, or other enclosed areas. Your
spit roaster is to be used OUTDOORS. The spit
roaster is not intended to be installed in or on
recreational vehicles and/or boats and should not
be placed under any surface that will burn. Do not
obstruct the
flow
of combustion and ventilation air
around the spit roaster housing.
Tools You Will Need
Standard Phillips-head screw driver (or cordless drill
and bits), Adjustable Spanner and protective mat.
Check Spit roaster for any Damage
Inspect spit roaster parts as you proceed with
assembly. Contact your supplier for assistance
regarding replacement of any damaged or missing
parts. Do not assemble or operate a spit roaster
that appears damaged. Spit roasters for use
with gas cylinders are labelled ‘LPG’.
Check labelling at the gas connection on your spit
roaster.
Protect Children
Keep children away from spit roaster during use
and until spit roaster has cooled after you have
finished.
Do not allow children to operate spit roaster.
Always ensure that no sporting or physical
activities are carried out in close proximity to the
spit roaster during use and while still hot.
FOR YOUR SAFETY
• Do not store or use petrol or other
flammable
liquids in the vicinity of this or
any other appliance.
• Do not store empty or full spare gas cylinders
under or near this or any other appliance.
• Keep the gas hose away from hot surfaces
and protect from dripping grease. Avoid
unnecessary twisting of hose. Visually
inspect the hose prior to each use for cracks,
excessive wear or other damage. Replace
the hose if necessary.
• Never test for gas leaks with a lit match or
open
flame
. Never light spit roaster with hood
closed or before checking to ensure the burner
tubes are fully seated over gas valve ori
fices
.
• Never lean over cooking surface when lighting.
• Never alter or modify the regulator or gas
supply assembly.
• This spit roaster must not be used indoors.
• Ensure the spit roaster is set up on a level
and stable surface.
• Do not move the spit roaster while in use or
when hot. Remove the fat cup before moving.
Summary of Contents for GSB300
Page 10: ...10 EXPLODED DIAGRAM ...