3
Remove any transit protection material. Remove all contents from the carton packaging. Make sure all parts are present
before attempting assembly.
Once the stand is fully assembled, go back and check to make certain all the fittings are secure.
ASSEMBLY INSTRUCTIONS
STEP 1
Assemble the upper right leg (B) to right leg (G) by 2pcs M6x12 (AA) screws.
STEP 2
Assemble the beam (F) to right leg (G) by 2pcs M6x12 (AA) screws locking from inner side to outer side, and again
locking them by 2pcs M6x30 screws (FF) from outer side to inner side.
AA x2
B
G x2
G x2
F
AA x2
FF x2
B
3
