7
6
Heater Positioning
1. Position heater at least 200mm from the eave
lining or ceiling or wall at 90˚ to heater.
2. Position heater at least 1.8m above the floor.
3. Never position in front, above or below a
power point.
4. If heater is facing another vertical surface,
example – wall, the gap must be at least 1
metre.
5. Never mount heater within 1 metre of a water
source, example – tap.
NOTE! Never mount heater into the wall or ceiling.
Only mount to the surface.
eave/ceiling
floor
1.8 m
wall
eave/ceiling
minimum 1.8m
wall
200mm
90°
1m minimum
200mm
floor
wall
heater
NO
eave/ceiling
heater
1.8m minimum
NO
