1
4
2
5
3
6
1. Select a level and stable surface
free of obstacles
4. (a) Remove hand wheel and bolt
(b) Rotate mounting bracket into
position
(c) Replace hand wheel and bolt
then tighten
2. Loosen hand wheel
on base and adjust
the legs into the
most stable position
5. Mount Water Heater using the
unique mounting system that
hooks into the carry handle
assembly
Bolt
Bolt
(a)
(c)
Hand
Wheel
Base
Hand
Wheel
Hand
Wheel
Tighten
3. Twist the pole in an Anti Clock Wise direction
and extend to the required height, then tighten
in a Clock Wise Direction
6. Secure to ground using the
stakes provided
LOCK
(Clockwise)
UNLOCK
(Anti-
Clockwise)
HOLD POLE
HERE THEN
ROTATE TOP
SECTION
AND
ADJUST
POLE
HEIGHT UP
OR DOWN
Max Height
130cm
CARE INSTRUCTIONS
Using warm soapy water with a mild
detergent wipe down all surfaces
and areas of the appliance. DO NOT
submerge the appliance in a sink
or bowl.
DO NOT use abrasive cleaners or
bleach.
Rotate
Mounting
Bracket
Mounting
Bracket
(b)
