Auger Operation
Page
134
05/06
Introduction
The auger (optional feature) can be
used for loading and unloading the air
seeder bins. The arm mechanism that
supports the auger will allow the augers
hopper to be positioned under the bins for
unloading or beside the machine for filling.
Fig. AO1 2120RT with auger in filling position.
To operate the auger you will need to
manoeuvre the barrel away from the
machine. Release the front auger barrel
clamp on the side of the front bin (refer Fig.
AO2).
Fig. AO2 Front auger barrel clamp.
Withdraw the pin that retains the primary
arm to the trailer and pull the arm outwards
a small distance to prevent the pin from re-
engaging (refer Fig. AO3).
Fig. AO3 Pin retainer on auger arm.
Release the rear auger barrel clamp at
the rear of the seeder to free the auger. Be
careful that the auger does not tip forward if
the barrel is out of balance. Move the auger
away from the machine using the handle
near the hopper to help in controlling its
position. You may need to rotate the auger
hopper if it has been tilted to its storage
position.
You are now free to manoeuvre the
auger to either fill or empty the bins. If you
wish to empty your bins it is advisable to
remove
the meterbox
hatches before
positioning the hopper underneath the
meterbox.
Fig. AO5 Manoeuvring the auger.
Once the hopper is in position you can
divert the oil flow away from the fan. Simply
withdraw the plunger-style valve to transfer
the flow. (Refer Fig. AO6).
