Assembly Instructions
Page
22
10/09
Fig. A9 Rigid ‘A Frame’ as used on the 1880RT.
Seeder to Implement Hitch to Suit
1880/90RT CTS (Control Traffic
Steerable) and 2120/50RT
The
implement
hitch
on
the
1880/90RT-CTS and 2120/50RT model
seeders must be mounted at the rear of the
bar. The 2 extension beams that protrude
rearward can be spaced to clear tines and
other implement structure but should be
symmetrical
about
the
implement
centreline.
(refer Fig. A10).
The cross beam can then be bolted
to the extension beams. Hydraulic hoses
can be secured to one of the extension
beams and connected to the central plate.
The 2120/50RT models also require
the fitting of a bracing structure. Two short
extension beams are to be mounted either
side of the main extension beams and
joined together with 2 connector bars. The
bars can be adjusted to suit the location of
the beams.
