EN
59
PROPERTIES OF YOUR NEW JUICER
The SLOW JUICER ADVANCED VITAL is intended for juicing fruit and vegetables,
as well as juicy greens and herbs (see: ‘Tips for Best Results’). Common types of
juicers cut the ingredients in very small and fine pieces, filtering the outcome. The
SLOW JUICER ADVANCED VITAL uses squeezing tools for pressing out the juices—
a method, that can be successful even with types of food that cannot be juiced via
cutting devices.
• The heavy-duty motor can well extract even fibre-rich vegetables (e.g. celery).
Due to the slow motion of the motor, the appliance is operated on a low level
of noise and vibrations.
• When switching off the motor, via an integrated, electronic brake the motor stops
immediately. To meet the requirements of different types of food, the motor can be
operated in reverse direction (“R”; see: ‘Power Switch for Forward and Reverse Ope-
ration’). This feature may help to remove obstacles from the juicing system without
disassembling the system (see: ‘Operation / Methods for Removing Obstacles’).
• The rubber blade sleeve removes the juices and fine particles and fibres from
the separating mesh of the filter sleeve, thus reducing the risk that fine residues
of pulp clog the juicing system.
• The rubber flap at the pulp outlet ensures that the pulp does not fall out of the filtering
area of the juicing system, before the juices are extracted as far as ever possible.
• Each part of the juicing system, coming in contact with food during operation,
can be removed after operation. Thus, the juicing system can be cleaned via
warm dishwater or in an automatic dishwasher (see: ‘Care and Cleaning’).
• Safety interlocks prevent operation of the motor, if the juicing system is not assem-
bled correctly (see: ‘Safety Features’).
• For keeping your workspace clean, a manually operated drip-stop shutter at the
juice spout avoids dripping, when removing the juice container after operation
(see: ‘Drip-Stop Feature’).
• The provided containers for juices are designed for fitting perfectly to the motor base.
Therefore, juices and pulp are not spilled during operation. However, you may use
any type of fitting container for collecting the juices and pulp during juicing.
DRIP-STOP FEATURE
At the juice spout, a drip-stop shutter is located. After switching off the motor and
before removing the juice container. For using this feature fold the black flap at the
juice spout down to the closed position. This will keep your working space clean.
