EN
79
Problem
Reason
The Solution
You are working too fast. Only fill in the pieces of food one by one. Only use the
pusher, if it is required really. Intermediately, let the motor
agitate in reverse operation (see: ‘Operation / Using
Reverse Operation’).
The pulp outlet is clogged. Switch off the juicer and unplug from the power supply.
Remove obstacles (see: ‘Operation / Methods for Remo-
ving Obstacles’).
The juicing system can-
not be removed from the
motor base.
The juicer cover is still
locked to the juicer post.
At first unlock the juicer cover. Then pull up the juice
collector for removing the juicing system from the motor
base.
Do not use violence.
You cannot disassemble
the squeezing auger and
filter sleeve.
The surfaces of the squee-
zing auger and filter slee-
ve stick together due to
residues of food.
Soak the parts for some minutes in warm dishwater.
Then try again. If required, press on the hexagonal shaft
of the squeezing auger for pushing the squeezing auger
out (see: ‘Care and Cleaning / Removing Residues of
Fibres from the Filter Sleeve’).
Very hard parts for the
food are caught between
the filter sleeve and juice
collector.
Hold the filter sleeve upside down over a soft surface (e.g.
a folded kitchen cloth). Then, carefully press out the squee-
zing auger (see: ‘Care and Cleaning / Removing Residues
of Fibres from the Filter Sleeve’).
Always remove all very
hard and inedible parts from your food, before juicing
(e.g. stones, stalks, hard shells). Hard parts can damage
the filter sleeve and squeezing auger.
