Slide the attachment of the processing tool over the drive of the motor
head (picture E). Ensure the guiding pin slides through the cannelure of
the attachment of the processing tool.
Push the processing tool upwards until the metal spiral compresses and
you are able to turn the processing tool anticlockwise (picture F).
The processing tool is properly assembled when the guiding pin is
locked in position (picture G).
To operate the appliance
Place the food into the bowl.
Grab hold to the motor head in front of the processing tool with your
left hand and rise the motor head slightly upwards.
NOTE:
When the motor head is locked in position the head release
lever is locked as well. To release the head release lever slightly rise the
motor head.
Push the head release lever (picture H) with your right hand upwards.
The motor head is now released and you can lower it carefully.
NOTE:
Do not drop the motor head. The motor head is very heavy and
the pivoted joint would get damaged if the motor head falls down with
active force.
Attach the splash guard to the top of the bowl, connect the power cord
to the outlet and turn the appliance ´On`. Select a slow speed to start
with and slowly arise the speed level until reaching the desired speed.
Add ingredients sideways. For adding ingredients you do not need to
remove splash guard. For more information regard to ´Tips for usage`.
CAUTION:
Do not block the ventilation slits on the back of the appliance
and do not use the appliance in continuous operation for more than
10 minutes to avoid overheating. If processing large quantities of
food, regularly interrupt operation and unplug the appliance for a few
minutes, to let the motor cool down.
As soon as the food has the right consistency turn the appliance ´Off`
by turning the speed control anticlockwise into the ´Off`-position
(picture I). Pull the plug.
ATTENTION: Never switch ´On` the appliance when the motor head is raised
and never raise the motor head when the appliance is in operational mode.
Risk of injury! Always ensure the appliance is switched ´Off` before raising
or lowering the motor head.
37
E
F
G
locked
release
lock
H
I
40969_designkuechenmaschineadvanced_manual.qxp 01.11.2007 08:59 Seite 37