switch ´Off` the appliance and IMMEDIATELY unplug the appliance after operation and if it
is not in use, cleaning and/or assembling or disassembling the processing tools. Always
grasp the plug to disconnect the appliance from the power outlet.
• Always handle the power cord with care. Do not pull or strain the power cord. The power
cord may never be knotted or squeezed. Do not let the power cord hang over the edge of
the table or counter. Take care not to entangle in the power cord.
• Do not touch the appliance with wet hands to avoid risk of electric shock. Do not touch
the appliance, when it is damp or wet and connected to the mains power supply. In this
case, immediately unplug the appliance to avoid risk of electric shock and damage.
Moving Parts – Risks of Injuries to Persons
• Do not touch the assembled processing tool (whisk, beater or dough hook) with your hands
or any other objects (hair, clothes, brushes, cooking utensils), when the appliance is
connected to the power supply. Always switch ´Off` the appliance, unplug the appliance
and wait for the motor to stop, before assembling/disassembling or cleaning the appliance
and when not in use.
•
ATTENTION: Keep hands and other utensils out of bowl while blending
food to reduce the risk of severe injury to persons or damage to the unit.
• Always handle the whole appliance with care and without violence to avoid injuries to
persons and damage.
• Always lower the motor head with the assembled processing tool first, then attach the
splash guard and then turn on the appliance. This way you avoid splashing.
•
ATTENTION: Never
use any other bowls then the provided. Ensure the bowl is firmly
attached before you start operating the appliance.
Features of Your Design Stand Mixer Advanced
Processing Tools
The appliance is delivered with three processing tools:
• Whisk: for liquid food (i.e. drinks, sauces, frothy desserts, pancake batter, whipped
cream, egg whites and more)
• Dough hook: for pastry, potatoes or butter.
• Beater: for stirring flour or fruit into cake mixes or making short crust pastry.
When assembled correctly, the processing tool accurate engage to the drive of the motor
head and will not fall or wobble. To release the processing tool push the processing tool
upwards (direction motor head) and turn it clockwise (chapter ´Assembling the processing
tool`).
WARNING:
Always switch ´Off` the appliance (speed control in position ´Off`) and wait
33
40969_designkuechenmaschineadvanced_manual.qxp 01.11.2007 08:58 Seite 33