EN
EN
10
11
KNOWING YOUR WATER KETTLE
PROPERTIES OF YOUR WATER KETTLE
Your new water kettle Design Water Kettle Pour Over Advanced is designed for
heating clear drinking water to any desired temperature from 40 °C to 100 °C
(104 - 212°F).
• You can
cancel any running heating cycle
by pressing the ON/OFF button
(display and button area get dark).
•
Cordless operation:
The kettle is connected to the power supply by simply pla-
cing it onto the power base. It may be turned on the base to any orientation.
• High-grade thermostat system ensures safe operation.
• Precise pouring due to the narrow gooseneck spout.
• Due to the
leak-free closing lid
, the water will not run out at the rim of the kettle
during pouring.
•
Steam vents in the kettle
ensure that the water will not run out at the spout duri-
ng heating.
•
LED display:
The appliance shows the actual water temperature, the set tempe-
rature and the currently running function.
•
Acoustic signals
indicate your entries and when the set temperature is reached.
•
Heating the water to the boil
via the “Boil” button. The heating cycle is termi-
nated, when 100°C (212°F) are reached.
•
Temperature control:
Set the desired temperature from 40 °C to 99 °C (104 °F
to 210 °F). The heating cycle is switched off automatically, when the set tempe-
rature is reached.
•
Keep warm function:
Press the “Keep Warm” button and set the desired tempe-
rature from 40°C to 99°C (104-210°F). The kettle heats up to the set tempera-
ture and keeps the selected temperature for up to 2 hours. You may remove the
kettle from the base for up to 5 minutes without cancelling the function.
•
Automatic shut-off:
The kettle cancels operation automatically,
– when it is removed from the power base, while it is heating up,
– when the set temperature is reached (without keep warm function),
– at the latest after 2 hours (with keep warm function), or
– when the kettle is removed for more than 5 minutes (with keep warm
function). After the automatic shut-off, you may start operation again at
once (see: ‘Operation’).
•
Energy saving mode:
Without any entries, the appliance dims the display and
button area after approx. 6 minutes for decreasing the energy consumption.
When the appliance is idle for approx. 10 minutes, the appliance switches off
and an acoustic signal reminds you to unplug the appliance.
1 LID:
does not fall off during pouring
2 STEAM VENTS
for avoiding excessive splashing during heating
3
1.0 litres stainless steel
KETTLE
with thermally insulated
HANDLE
4 POWER CONNECTOR
at the
KETTLE BASE
5 POWER BASE
with
POWER SOCKET
and
OPERATING ELEMENTS
6 BUTTON AREA
7 ON/OFF BUTTON:
press here for switching the appliance on or off.
8 BOIL BUTTON:
starts the heating process for boiling water.
9 KEEP WARM BUTTON:
keeping the water warm for max. 2 hours.
10 ADJUSTMENT BUTTONS „+“ AND „–“:
for setting the desired temperature.
11 DISPLAY
12 BOIL ICON:
illuminated, when the boil function is running.
13 KEEP WARM ICON:
illuminated, when the keep warm function is running.
14 ACTUAL TEMPERATURE
25 SET TEMPERATURE
PORCELAIN FILTER
5
6
11
1
2
3
4
7
10
9
8
FILLING LEVEL MARKINGS
„MIN / 0.2L“ and „MAX / 1.0L“
at the interior of the kettle
15
14
11
13
12
